Joystick Trouble

Issues with mercs? Post it up here!
Forum rules
Please provide the following when making a support request.
1. OS & Service Pack.
2. Version of Mercenaries that is being used.
3. If you are using 95 Mercs, please provide what method you are using to run it? (ie. Kontza's or Slugs Hook)
4a. If you are using DOS have you read the install guide?
4b. If you are using 95 have you watched the 95 install video?
5. What were the steps that you did after the initial installation? (if applicable)
Post Reply
User avatar
ThePorthos
I.S. Mech Washer
Posts: 21
Joined: Mon Feb 22, 2010 10:32 pm
Contact:
Contact ThePorthos

Joystick Trouble

Post by ThePorthos »

After about an hour of searching through the forums and a headache I figured I'd just ask this.

I'm loving re-living Mechwarrior via the MechVM. However, my current joystick (Logitech Extreme 3d Pro) seems to only have Y-X axis movement. Everyone knows a good mechwarrior needs to be able to twist his torso :D. So, what would one have to do to set this up for my z axis on the joystick? Thanks
Top
User avatar
ThePorthos
I.S. Mech Washer
Posts: 21
Joined: Mon Feb 22, 2010 10:32 pm
Contact:
Contact ThePorthos

Re: Joystick Trouble

Post by ThePorthos »

Nevermind I figured it out and now feel stupid.
Top
User avatar
Hadakajime
House Steiner Private
House Steiner Private
Posts: 50
Joined: Mon Feb 01, 2010 6:36 pm

Re: Joystick Trouble

Post by Hadakajime »

post up your solution so other people can use it too. :)
Top
User avatar
ThePorthos
I.S. Mech Washer
Posts: 21
Joined: Mon Feb 22, 2010 10:32 pm
Contact:
Contact ThePorthos

Re: Joystick Trouble

Post by ThePorthos »

Its easy, just go into control options and go to custom configuration, I was hitting joystick control and it was kicking me to control panel. For anyone who has problems with the throttle being reversed, its as easy as clicking the -/+ next to the command binding and it will turn it into +/- (or vice versa)
Top
Post Reply

Return to “MechWarrior 2: Mercenaries”