USB mouse working in PS/2 in DOS

Issues with mercs? Post it up here!
Forum rules
Please provide the following when making a support request.
1. OS & Service Pack.
2. Version of Mercenaries that is being used.
3. If you are using 95 Mercs, please provide what method you are using to run it? (ie. Kontza's or Slugs Hook)
4a. If you are using DOS have you read the install guide?
4b. If you are using 95 have you watched the 95 install video?
5. What were the steps that you did after the initial installation? (if applicable)
Post Reply
User avatar
House Steiner Sergeant
House Steiner Sergeant
Posts: 145
Joined: Thu Nov 26, 2009 6:39 am

USB mouse working in PS/2 in DOS

Post by navbuoy »


I got Mercenaries installed on an old Celeron 500 machine with Windows 98 (w/KernelEx applied to it to give it some light XP functionality)
Now my original mouse with the wheel was malfunctioning and I knew I had an old USB to PS/2 adapater laying around.

Went to the dollar store and bought mini USB optical mouse and mouse pad.

Of course it didn't work. The mouse not the pad (j/k)

Tried it with another older USB optical mouse and it works beautifully in DOS.

Labtec USB Optical Mouse

This pic even shows the adapter that I used.

Just in case someone gets the hankerin' to go Old School and sets up a real DOS Box. :)
Post Reply