Mercs D3D

Issues with mercs? Post it up here!
Forum rules
Please provide the following when making a support request.
1. OS & Service Pack.
2. Version of Mercenaries that is being used.
3. If you are using 95 Mercs, please provide what method you are using to run it? (ie. Kontza's or Slugs Hook)
4a. If you are using DOS have you read the install guide?
4b. If you are using 95 have you watched the 95 install video?
5. What were the steps that you did after the initial installation? (if applicable)
Post Reply
Mech Collector
I.S. Baby
Posts: 1
Joined: Tue Oct 07, 2014 12:36 pm

Mercs D3D

Post by Mech Collector »

Is the win95 Direct 3d version of mercs one that comes with the dynamic salvage? Will it run ok via MechVM? Or should I try the titanium version?

Also I have the Mercs disc with both DOS and win95 versions on it, however when I try to run the win95, it will not launch any mission and instead automatically fails. Is there some solution to this so I can use the win95 and have dynamic salvage?
morrow
I.S. Baby
Posts: 6
Joined: Sun Oct 05, 2014 9:20 pm

Re: Mercs D3D

Post by morrow »

You want to look at this page viewtopic.php?f=9&t=281
and see if your CD matches up with any of the CD images.

I think you will still need to apply the v1.1 windows patch for your Direct3D version of mw2 mercs.
Post Reply